Troubleshooting: Lighting stuck or not responding on the Mad Catz C.A.T. 12 Switch Controller

Applies to: Mad Catz C.A.T. 12 Switch Controller
Last updated: 2025-10-07

Problem
RGB lights frozen on one color or off.

Solution
Reset lighting mode or power-cycle controller.

Step-by-step instructions

1. Hold LIGHT for 5 seconds to enter lighting control.
2. Press LIGHT again to cycle patterns.
3. If unresponsive, disconnect and reconnect USB-C.
4. If still frozen, perform soft reset (TURBO + HOME 5 s).

Optional methods or tools

• Firmware update if provided by Mad Catz

Best practices or tips

• Avoid static charge around port area
• Do not unplug during lighting change