How do I replace the battery in the Mad Catz C.A.T. 12 Switch Controller?

Applies to: Mad Catz C.A.T. 12
Last updated: 2025-10-07

Problem
Battery holds less charge or fails to power on.

Solution
Replace the battery module with a compatible unit.

Step-by-step instructions

1. Disconnect and remove back panel screws.
2. Unplug the battery connector carefully.
3. Install the new battery with matching specs.
4. Reconnect and reassemble.
5. Fully charge before use.

Optional methods or tools

• Plastic pry tool and small Phillips screwdriver.

Best practices or tips

• Use manufacturer-approved replacements only.